Customer's Cars
SBD Cars
SBD Motorsport
SBD Cars
 
SBD 967I Series ECU Wiring Insructions

Pin 1

Purple or Orange

 Perm. +12V(direct to battery, Via relay)
Pin 2 White or Red Perm. +12V(direct to battery, Via relay)
Pin 3 Grey or Yellow Gearshift light earth trigger
Pin 4 Green or Blue Taco (Rev counter)
SBD 967I Series ECU Wiring Insructions
Connect Pins 1 & 2 through a relay as shown:-
SBD 967I Series ECU Wiring Insructions
NOTE - 2.5mm Core wire must be attached directly onto battery +ve post.

Relay Pin no. 30 - Connect directly to battery +ve post with 2.5mm core wire(see note above)
Relay Pin no. 85 - Connect to Earth
Relay Pin no. 86 - Connect to ignition switched +12V
Relay Pin no. 87 - Connect to 2 wires from interface sure seal pins 1 & 2.
To install a large gear change light
Large gear change light installation
Relay Pin no. 30 - Connect to ignition switched +12V
Relay Pin no. 85 - Connect to interface sure seal pin no. 3
Relay Pin no. 86 - Connect to ignition switched +12V
Relay Pin no. 87 - Connect to gear change lamp
If using a small L.E.D. then a relay is not required
Small LED gear change light installation
 
Coil connector pin outs
MBE Information Index
Home | Price List | Sitemap | Contact Us
Events | Press Coverage | Meet the Staff | Frequently Asked Questions | Links | Sponsorship | Terms & Conditions
SBD Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton, Surrey. KT6 7QD. Tel: 0208 391 0121.
Email Contact Details