 |
 |
|
9A4/9A8/992
to 985/973 CAN Interface Wiring
| 985/973 | 4-way Connector Superseal/Sureseal | Description | 9A4/9A8/992 |
| 16 | Pin 1 | IGN 12V | N/A |
| 4 | Pin 2 | Power Ground | N/A |
| 14 | Pin 3 | CAN Low | Pin 8 |
| 6 | Pin 4 | CAN High | Pin 9 |
9A4/992
Engine Harness Half
Uses Tyco Electronic/AMP Superseal connector. Available from RS Components.
You require 4-way tab housing, part no. 314-1277 (packs of 5). You will
also require receptacles (female) 0.35 - 0.50 wire is 314-1334 (packs
of 100).
985/973 Adaptor Half
Uses Tyco Electronic/AMP Superseal connector. Available from RS Components.
You require the 4-way receptacle housing part no. 314-1211 (packs of 5).
You will also require tab (male), 0.35 - 0.50 wire part no. 314-1312 (packs
of 100).
Note: Seals to make these connectors maintain IP67 sealing, you require wire seals part no. 314-1176.
SBD
Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton,
Surrey. KT6 7QD. Tel: 0208 391 0121.