Assembly
instructions for idler bearings
***ALL BEARINGS ARE FITTED THE SAME WAY ROUND AS SHOWN IN PHOTO***
|
Assembly
instructions for idler bearings
|
||
| 1. Cut off plastic sleeve - if fitted |
|
|
| 2. Put bearings in freezer overnight |
|
|
| 3. Heat sleeve in an oven or use a butane blowlamp |
|
|
| 4.
Insert bearing from freezer into hot sleeve ***ALL BEARINGS ARE FITTED THE SAME WAY ROUND AS SHOWN IN PHOTO*** |
|
|
| 5. Fit circlip |
|
|
|
|
||
| 6. The finished assembly |
|
|