 |
 |
 |
Hayabusa
Regulator/Rectifier to Generator wiring
These
instructions should be sufficient to produce a wiring loom to integrate
the changing circuit into most aftermarket systems.
On
some occasions standard crank sensor connectors have been damaged. This
information has been produced so you can check continuity between the
ECU and engine on the Hayabusa. They must be wired the correct way round,
or the engine will not run.
SBD
Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton,
Surrey. KT6 7QD. Tel: 0208 391 0121.