| 1.
- Mark tube & End caps (To ensure correct positioning on re assembly).
2. - Remove end caps & discard packaging (if your box was originally
packed with stainless steel mesh and wading, please discard both).
3. - Roll packing material around perforated tube, placing tube at one
end and rolling up to the other end.
4. - Carefully slide entire roll into the centre of the steel or carbon
tube and locate the perforated tube at the bottom.
5. - Assemble end caps as required matching your own markings.
6. The brown parcel tape at the end of the material will burn off when
engine is first run.
|