 |
 |
|
| TP-BUSA-T50K-TWIN We are pleased to announce a new design of Suzuki Hayabusa TP50 twin throttle bodies, we have used the design of the TP50 single which worked exceptionally well but due to the port spacing of the 2008 onwards engine had to be redesigned into pairs. With improvements with machining technique we have been able to produce the same tapered shape in the twins, this has allowed us to reduce the manufacturing costs making them a more affordable unit with all the benefits of the singles. They incorporate the same butterfly & injector positioning as was developed for the TP50 singles, which improves fuel atomisation giving the potential for more horsepower. We carried out further tests with these throttle bodies & found that as with the singles, the design was so good that an extra set of injectors was not necessary. This kit comprises of throttle bodies which are of a tapered design they have a 52mm entry tapering down to a 50mm butterfly then continuing to the optimal size to match to the cylinder head, connecting levers, fuel rail, throttle cable mounting bracket & fixings. The casting is optimised to give the lightest casting possible. |
 |
 |
The air horns are sold as a separate part as the length required is dependant on your engine specification. AH52-19TS
Set of 4 air horns 52 x 19mm, 78mm O/D for Hayabusa TP50 throttle
bodies for use on 1300cc & 1400cc engines AH52-69TS Set of 4 air horns 52.5 x 68.7mm, 83mm O/D For Hayabusa TP50 throttle bodies for use on the long stroke engines 1475cc, 1585cc, etc (shown below on throttle bodies) |
|
TP-BUSA-T50K The
Suzuki Hayabusa TP50 throttle bodies have superseded the TP48s &
have been improved to be more compact with even better throttle
response. They have new butterfly & injector positioning which
improves fuel atomisation giving the potential for more horsepower.
In tests, the design was so good that an extra set of injectors
is not necessary. This kit comprises of throttle bodies which are of a tapered design they have a 52mm entry tapering down to a 50mm butterfly then continuing to the optimal size to match to the cylinder head, connecting levers, fuel rail & fixings. The casting is optimised to give the lightest casting possible. View the SBD Hayabusa Tapered throttle body set-up instruction sheet |
 |
|
The air horns are sold as a separate part as the length required is dependant on your engine specification. AH52-19
Air horns 52 x 19mm, 78mm O/D for Hayabusa TP50 throttle bodies
for use on 1300cc & 1400cc engines AH52-69S Set of 4 air horns 52.5 x 68.7mm, 83mm O/D For Hayabusa TP50 throttle bodies for use on the long stroke engines 1475cc, 1585cc, etc (shown below on throttle bodies) |
 |
 |
|
|
| Read about OMS cars using our hayabusa throttle body kits |  |
