MBE9A4i
ECU
Tachometer
Output
The MBE9A4i ECU produces a square wave 12V output, this is configurable from within the ECU for the number of pulses that occur on the tacho signal per engine cycle. This means it can be programmed to suit your own tachometer's requirements. The tacho signal also has programmable duty cycle.
| If you intend on using our MBE995 display or a dash such as an AIM that can be configured to receive the information over CAN, you would be able to use the tacho output from the MBE for a different function since it would be no longer needed. |
 |