|
|
|
|
| |
|
|
|
MBE995
Display
|
|
|
|
New
MBE 995 Display only compatible with the MBE9A4 engine ecu &
MBE 998 data logger* (Oil temperature & fuel pressure only available
with MBE998) using CAN communication.
(12v, Ground, CAN high & CAN low)
Fully configured. Shift lights.
Shows gear position, oil temperature & pressure, fuel pressure,
engine temperature, battery voltage & revs, the different screens
are viewed by scrolling though when pressing the black right hand
button. To return to the default display of gear position, press
the black button on the left side.
Suitable
for Vauxhall, Duratec & Suzuki engines. Full requirements must
be discussed before dispatch.
|
|
|
| |
|
|
|
|
|
|
Engine
rpm, shown without & with shift lights.
|
Engine/Water
temperature, if this rises too high the centre light on the bottom
|
Battery
Voltage
|
|
Displayed
in hundreds, ie 96 = 9600rpm
|
|
|
|
|
|
|
|
Oil
pressure display - if you have a pressure sensor, we can enable
the display to show oil pressure. If the oil pressure drops
too low the lower left red light will come on, see below.
Instruction
sheet for wiring
|
|
|
Air
temperature - is useful for turbocharged & supercharged
engines.
|
|
|
MAP
- Manifold pressure sensor. Used on turbocharged & supercharged
engines. The pressure the MBE ECU is seeing can be transmitted
directly to your display.
|
|
|
|
|
|
|
|
|
*Oil
Temperature, only available with MBE998
|
|
|
*Fuel
pressure, only available with MBE998
|
|
|
| |
|
The
red warning lights are situated at the bottom of the display, they show
as follows:
|
|
|
|
|
|
Left
- low oil pressure light. Your MBE9A4/9A8 can be configured
to be triggered from a oil pressure switch or an oil
pressure sensor.
|
|
|
Centre
- high water/engine temperature light.
|
|
|
Right
- *high oil temperature light. Only available with MBE998
|
|
|
|
|
|
|
Shifts
lights are shown across the top of the display, progressively moving
from the outside to the middle as the optimum gear change point
is reached.
|
|
|
|
| |
|
Gear
position, requires a gear position sensor input to MBE9A4/9A8. Your
gear box must be able to supply a gear position output.
|
|
|
| |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
SBD
Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton,
Surrey. KT6 7QD. Tel: 0208 391 0121.
|
|
|
