Ignition
Only Wiring Looms
LM967I-IC
Wiring loom for distributorless ignition only with comms lead, interface connector 4 way sureseal, crank sensor, coil connector (with adaptor) & chassis ground.
 |
LM967I-TP-ADP Weber Throttle Position Sensor Adaptor for NON TPS Ignition only Harness. Must be fitted by us beforedispatch. |
 |
LM967I-COMMS Comms lead add on for 967I if you wish to remap the ECU yourself. Must be fitted by us before dispatch |
LM967I-FD-TP
Wiring Loom for Distributorless Ignition only. Coil &TPS Ford
Adaptors
Looms for Group N Cars
These adaptors are designed to allow you to fit a MBE ECU to your car without replacing the car's standard wiring loom LM7 (not shown) Group N adaptor loom MBE941 to Calibre - Turbo
These adaptors are designed to allow you to fit a MBE ECU to your car without replacing the car's standard wiring loom LM7 (not shown) Group N adaptor loom MBE941 to Calibre - Turbo
for a distributorless engine with Bosch Motronic ECU to fit an MBE967E ECU
distributor driven engine with Bosch Motronic ECU to fit an MBE967E ECU
For
Group N kit, please click here