HT
Leads, Coils & Distributor Blanks
HT-LK1-SBD High Tension Lead Set with fittings to suit Beru ends Distributor less 2.0L XE (shown above) Also available for the Ecotec engine HT-LK2.
| HT Leads available separately: | |
| HT-VX-01 | 530mm/21" |
| HT-VX-02 | 405mm/16" |
| HT-VX-03 | 305mm/12" |
| HT-VX-04 | 205mm/8" |
We can make HT leads to your required lengths with fittings to suit Beru ends.
HT-LEAD1 Single HT Lead up to 30" centres
| Part No | Description |
| HT-BERU1 | HT lead end for spark plug |
| HT-BERU2 | HT lead end for distributor/coil |
| HT-BERU3 | HT lead end for standard 16v coil |
| HT-TS-M3 | HT thread sleeves M3 |
| HT-TS-ST | HT thread sleeves saw tooth |
.gif)
COIL-4
Coil 4 pin to suit distributorless engines
COIL-4-MOUNT Mounting kit for Coil-4 to 2.0L 16v cylinder head
COIL-4 mounted on 2.0L engine using the mounting kit COIL-4-MOUNT with HT leads HT-LK1
COIL-4-MOUNT-1.6 Mounting kit for Coil-4 to 1.6L 16v cylinder head
 |
 |
|
DIZ-SRT-1
|
DIZ-REP-BLK
Distributor blank requires seal DIZ-SEAL (exhaust cam must
be plugged)
|
|
Shorten
2.0L XE 16v distributor, blank cams (please supply a distributor
to shorten)
|