 |
 |
|
2.0L
Vauxhall Coils, HT Leads, Spark Plugs & Distributor Blanks
Coil
& Mounting Kit
 |
COIL-4 GM/Sagem Coil 4 pin to suit distributorless engines |
 |
COIL-4-MOUNT We have designed a new strong lightweight coil bracket to suit GM/Sagem coil (SBD part no:COIL-4), on to the back of the 2.0L XE cylinder head in the same position as the original distributor cap so allowing the original HT leads to be used. The bracket has been laser cut & powder coated. Shown below is the COIL-4 mounted on 2.0L engine using the mounting kit COIL-4-MOUNT. |
.gif) |
HT
Leads
 |
HT-LK1-SBD High Tension Lead Set with Beru ends (shown left). To suit COIL-4 & COIL-4-MOUNT only. Lead set can also be used in conjunction with HT-LEAD-4 to create a custom length lead set for coil packs mounted in a different position. Also available for the Ecotec engine HT-LK2. |
|||||||||||
|
||||||||||||
|
||||||||||||
|
|
 |
|
We can make HT lead centres to your required lengths with fittings to suit Beru ends. See picture right showing where to take measurements. The ends are shown for illustration purposes only & are not included in HT-LEAD-1 & HT-LEAD-4. |
|
| HT-LEAD1 Single HT Lead centre up to 30" | |
| HT-LEAD4 Set 4 HT Lead centres up to 30" | |
Spark
Plugs & Covers
 |
SP-BCPR7ES
Spark plug with a built in resistor suitable for most of the 16v
Vauxhall OPEL range of engines. Suitable for all competition applications.
|
|
|
SP-CC1-SBD
Carbon spark plug cover 2.0L XE with SBD logo
|
 |
|
Distributor
Blanks
 |
DIZ-SRT-1
Shorten 2.0L XE 16v distributor, blank cams (please supply a
distributor to shorten)
|
 |
|
|
DIZ-REP-BLK-2
Distributor blank requires seal DIZ-SEAL (exhaust cam must
be plugged)
|
SBD
Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton,
Surrey. KT6 7QD. Tel: 0208 391 0121.