|
|
|
|
| |
|
Flywheels,
Clutch covers & plates
|
| |
|
The
standard Duratec clutch & flywheel assembly is not suitable for competition
use & therefore has to be replaced with a suitable combination.
|
 |
|
|
|
|
FLY-W-DURA-01A
Duratec 8 1/2" lightweight steel flywheel with integral
ring gear approx 4.89kg (shown above)
|
|
FLY-W-DURA-01
Duratec 8 1/2" lightweight standard flywheel with integral
ring gear approx 4.8kg
|
|
|
FLY-W-DURA-02
Duratec
8.5" Ultra Lightweight Standard Flywheel Integral Ring
Gear approx 3.82kg
|
|
|
CLTC-DURA-5905
Clutch cover for Duratec 2.0L engine 215mm approx 4.4kg
|
|
|
Duratec
Organic Clutch Plate 215mm
for use FLY-W-DURA-01 approx 1.2kg
|
|
CLT-20-2619
Duratec clutch plate 1" x 23 spline
|
|
CLT-20-1340
Duratec clutch plate 7/8" x 2 spline
|
|
|
|
|
|
|
|
|
|
FLY-W-DURA-04
Duratec
7.25" Standard Steel Flywheel approx 4.1kg
|
|
|
FLY-W-DURA-03
Duratec
7.25" Ultra Lightweight Standard Flywheel Integral Ring
Gear, shown right on our Duratec display engine. approx 3.2kg
|
|
7.25"
Super
Clutch is suitable for this flywheel. The combination
will be dependant on your engine specification & usage.
Please contact us to discuss your requirements.
|
|
|
|
|
A
new range of small diameter lightweight flywheels has been specially produced
for the Duratec 2.0L & 2.3L engine. The diameter has been made as
small as possible, that still allows for a starter motor to be fitted
to the engine block. They are 268mm in diameter, we've produced them to
accept the 7 ¼" (184mm) & the 5 ½" (140mm)
clutches. The new smaller diameter reduces inertia & depending on
the type you pick, the smaller & lighter the clutch the greater the
reduction is inertia & the faster the engine will be able to accelerate.
Must be used the special designed
starter motor.
|
| |
|
|
|
|
FLY-W-DURA-05
Duratec
268mm Diameter flywheel. 7.25"Ultra lightweight
2.6kg
|
|
7.25"
Super
Clutch is suitable for this flywheel. The combination
will be dependant on your engine specification &
usage. Please contact us to discuss your requirements.
|
|
|
|
|
|
|
FLY-W-DURA-06
Duratec
268mm Diameter flywheel. 5.5"Ultra lightweight
2.1kg
|
|
5.5"
Super
Clutch is suitable for this flywheel. The combination
will be dependant on your engine specification &
usage. Please contact us to discuss your requirements.
|
|
|
|
|
STR-DURA-2.0-2.3L-01
Duratec
Special starter for 268mm Flywheel
Must
be used with the 268mm diameter flywheels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SBD
Motorsport Ltd, Unit 15, Red Lion Business Park, Red Lion Road, Surbiton,
Surrey. KT6 7QD. Tel: 0208 391 0121.
|
|
|
.gif)
.gif)
